A Complete Line of Climate Control Products


Quest PowerDry 385D Pro and 1200D Pro Portable Desiccants

The Quest PowerDry 385D Pro provides more water removal (in certain conditions) and a wider operating range than refrigerant based dehumidifiers. The Quest PowerDry 385D Pro is designed to operate vertically or horizontally, and accommodates multiple ducting scenarios. Its large recessed wheels make it easy to transport and maneuver in the work area. Two standard 115 VAC power cords are included and, after correctly directing the wet reactivation air, the Quest PowerDry 385D Pro can simply be plugged in and turned on. Like the Quest Dry 115, a low voltage control kit is also available for the 385 Pro, allowing the unit to be controlled by a remote dehumidistat, timer, or switch.

The Quest PowerDry 1200D Pro has been designed from the ground up for simple, quiet, reliable operation and can operate under the harshest of conditions (-10°F to 140°F). The 1200D Pro can remove an amazing 43 gallons (344 pints@80°F/60%RH). The 1200D Pro offers a constant-run mode for maximum operation and a humidistat controlled mode for sensitive climates. The 1200D Pro is a 230 volt — single phase unit with selectable 25 or 40 amp draw. Portable, reliable, easy to use, the Quest PowerDry 1200D Pro is a powerful commercial and industrial climate control drying solution.

Dehumidifying Completely Sealed Structures: In some cases, exhausting reactivation air from a structure may not be possible. When that is the case, you can simply exhaust the wet reactivation air into one of our Quest refrigerant dehumidifiers and then drain the condensate away.


(Click Photo for Larger Image)
Part No.: 4029110
Power: 2 Circuits; 11 Amps, 115 V Each – 22 Amps Total
Water Removal: 115 Pints/Day
@80°F, 60%RH
Efficiency: 2.5 Pints/kWh
Blower: 385 CFM
Operating Temp.: -10°F to 140°F
W x H x D:
24¼″ x 40″ x 21⅜″
Weight: 105 Lbs.


(Click Photo for Larger Image)
Part No.: 4028200
Power: User Selectable 25 or 40 Amp – 220 V – Single Phase
Water Removal: 344 Pints/Day
@80°F, 60%RH
Efficiency: 2.5 Pints/kWh
Blower: 900 CFM Process Airflow
300 CFM React Airflow
Operating Temp.: -10°F to 140°F
W x H x D:
26.5″ x 35″ x 45″
Weight: 265 Lbs.

Applications | About Us | Contact Us | Privacy Policy
Copyright © Therma-Stor LLC